Tricot Why Shipments Get Rejected Over This
Many disputes come down to Tricot. Below is what inspectors check and why shipments fail.
The core definition
warp knit with fine vertical ribs on the face. Working figures for Tricot normally sit around 80-180 GSM in mainstream production. Note warp knit construction on the tech pack so nobody tests against an older revision.
Most common cause of failure
Results usually fall outside 80-180 GSM because the target was never written into the order. Record elastane content alongside Tricot, because blends shift the measured value. A result outside 80-180 GSM usually points to process drift rather than to the fibre itself.
How it is checked
Inspection and laboratory work both refer to warp knit construction. Keeping reference values for Tricot lets suppliers quote without extra sampling rounds. Ask for conditioning details together with warp knit construction, since both affect the reading.
Related faults
it is used where low curl and smooth surfaces matter, so related complaints often point back to this single parameter. Working figures for Tricot normally sit around 80-180 GSM in mainstream production. Note warp knit construction on the tech pack so nobody tests against an older revision.
Avoiding rejection
Agree targets, tolerances and the method before production, then test per lot rather than per shipment. Record elastane content alongside Tricot, because blends shift the measured value. A result outside 80-180 GSM usually points to process drift rather than to the fibre itself.
