-
Source:News / Time:2026-09-21
Bonded vs Sewn Seams: Adhesive Film Selection
When to bond and when to sew a sports bra seam: choosing an adhesive film by activation temperature and modulus, press parameters to record, wash and bond strength testing, and production controls that prevent delamination in customer laundering and returns.
Details -
Source:News / Time:2026-09-21
Fabric Shrinkage Control for Sports Bra Production
Controlling shrinkage in sports bra production: the three sources of movement in stretch knits, the correct test methods, tolerance as a range with component matching, mill and factory controls, and verifying on washed garments rather than flat rolls before bulk approval.
Details -
Source:News / Time:2026-09-21
Wicking vs Absorption: Specifying the Right Moisture Behaviour
The physical difference between wicking and absorption, what AATCC 79, 197, 195 and 201 each report, how to choose the right moisture behaviour for medium impact training, and the wash durability clause to add to a sports bra fabric spec.
Details -
Source:News / Time:2026-09-21
Sustainable Fabric Documentation Buyers Need from Mills
The document set buyers should request from fabric mills: facility certificates versus lot-level evidence, chemical and environmental proof, roll-to-yarn traceability through dye lot numbers, how to verify a certificate and how to attach deadlines to documents in a purchase order.
Details -
Source:News / Time:2026-09-21
OEKO-TEX and GRS: What Certificates to Request per Lot
Which OEKO-TEX and Global Recycled Standard documents to request per lot: article certificates versus facility programmes, transaction certificate mechanics, product class II limits, the four failure patterns to check and how to verify a certificate number online before the goods ship.
Details -
Source:News / Time:2026-09-21
Seamless vs Cut-and-Sew Construction for Medium Impact Sports Bras
Seamless knitting and cut-and-sew produce very different garments. This guide compares cost, MOQ, shaping, ventilation detailing and support control for medium impact sports bras so buyers can choose with evidence.
Details -
Source:News / Time:2026-09-21
Pattern Making for Cut-Out Back Sports Bras: Common Pitfalls
Cut-out back patterns fail in predictable ways. This guide covers the seven most common pattern and sewing pitfalls for rear opening sports bras, and the specification checks that prevent them reaching bulk.
Details -
Source:News / Time:2026-09-21
Hook-and-Eye Closure Grades: What Buyers Should Specify
Not all back closures are equal. This guide sets out the hardware variables that determine hook-and-eye performance, the compliance documents per market, and the cycle tests that separate a durable closure from a cheap one.
Details -
Source:News / Time:2026-09-21
Design Brief Template for a Private Label Medium Impact Sports Bra
Most inaccurate quotations start with a vague brief. Use this six-section template to specify channels, sizing, fabric, construction and compliance for a medium impact sports bra and get comparable quotes from factories.
Details -
Source:News / Time:2026-09-21
Padding Options for Sports Bras: Moulded, Removable and Bonded
Padding choice drives profile, wash performance and cost. This guide compares moulded, removable and bonded padding for medium impact sports bras, with the foam tests and specification details buyers should require.
Details
News
