Nylon 66 High Tenacity Spandex Breathable Mesh Jacquard Knit combines nylon 66 filament with high tenacity spandex with a Jacquard Knit construction. It is aimed at Base Layers that require next-to-skin comfort with continuous moisture movement, and the reason is straightforward: higher melt point and better abrasion resistance for demanding uses, so Breathable Mesh.
Nylon 66 High Tenacity Spandex 260 GSM Jacquard Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Breathable Mesh Jacquard Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Jacquard Knit (a patterned jacquard knit) |
| Weight | 260 GSM |
| Width | 155 cm |
| Function | Breathable Mesh — keeps air moving across the skin in high heat zones |
| Performance target | air permeability above 400 mm/s |
| Test method | ISO 11092 thermal and water vapour resistance |
| Additional value | ventilation mapped to the pattern rather than added as an afterthought |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a patterned jacquard knit is used, the fabric behaves consistently across the roll: zoned structure and ventilation placed exactly where the pattern requires. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Jacquard Knit construction shown at close range
Performance features
- Breathable Mesh: keeps air moving across the skin in high heat zones, measured by ISO 11092 thermal and water vapour resistance.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: zoned structure and ventilation placed exactly where the pattern requires.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Base Layers and for the accessories around them. next-to-skin comfort with continuous moisture movement is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Breathable Mesh fabric prepared for Base Layers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
