This Seamless Circular Knit is built for brands whose Cycling Jerseys programme needs aerodynamic fit with a stable print surface without a complicated supply chain. Knitted from nylon 66 filament with high tenacity spandex, it offers higher melt point and better abrasion resistance for demanding uses, and the construction is engineered so that Moisture-Wicking.
Nylon 66 High Tenacity Spandex 220 GSM Seamless Circular Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Moisture-Wicking Seamless Circular Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Seamless Circular Knit (a seamless circular knit) |
| Weight | 220 GSM |
| Width | 165 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a seamless circular knit is used, the fabric behaves consistently across the roll: tubular production that removes the side seam entirely. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Seamless Circular Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: tubular production that removes the side seam entirely.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Cycling Jerseys and for the accessories around them. aerodynamic fit with a stable print surface is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Cycling Jerseys production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
