This Brushed Fleece Knit is built for brands whose Tennis and Golf Wear programme needs sun protection with a clean, structured appearance without a complicated supply chain. Knitted from nylon 66 filament with high tenacity spandex, it offers higher melt point and better abrasion resistance for demanding uses, and the construction is engineered so that Thermal Brushed.
Nylon 66 High Tenacity Spandex 300 GSM Brushed Fleece Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Thermal Brushed Brushed Fleece Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Brushed Fleece Knit (a brushed back fleece knit) |
| Weight | 300 GSM |
| Width | 165 cm |
| Function | Thermal Brushed — traps warm air while staying light enough for active use |
| Performance target | thermal resistance above 0.08 m2K/W |
| Test method | ISO 11092 thermal resistance |
| Additional value | warmth-to-weight ratio better than a standard fleece |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a brushed back fleece knit means a soft inner face that traps warm air without heavy weight, and that structure is what allows the fabric to traps warm air while staying light enough for active use under the conditions Tennis and Golf Wear actually face.
Brushed Fleece Knit construction shown at close range
Performance features
- Thermal Brushed: traps warm air while staying light enough for active use, measured by ISO 11092 thermal resistance.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: a soft inner face that traps warm air without heavy weight.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Tennis and Golf Wear, where sun protection with a clean, structured appearance is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Thermal Brushed fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
