This Spacer Knit is built for brands whose Hoodies and Joggers programme needs warmth without bulk and a stable brushed surface without a complicated supply chain. Knitted from nylon 66 filament with high tenacity spandex, it offers higher melt point and better abrasion resistance for demanding uses, and the construction is engineered so that Breathable Mesh.
Nylon 66 High Tenacity Spandex 330 GSM Spacer Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Breathable Mesh Spacer Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Spacer Knit (a spacer knit with two faces) |
| Weight | 330 GSM |
| Width | 175 cm |
| Function | Breathable Mesh — keeps air moving across the skin in high heat zones |
| Performance target | air permeability above 400 mm/s |
| Test method | ISO 11092 thermal and water vapour resistance |
| Additional value | ventilation mapped to the pattern rather than added as an afterthought |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a spacer knit with two faces is used, the fabric behaves consistently across the roll: cushioning and airflow built into a single piece of fabric. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Spacer Knit construction shown at close range
Performance features
- Breathable Mesh: keeps air moving across the skin in high heat zones, measured by ISO 11092 thermal and water vapour resistance.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: cushioning and airflow built into a single piece of fabric.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Hoodies and Joggers and for the accessories around them. warmth without bulk and a stable brushed surface is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Breathable Mesh fabric prepared for Hoodies and Joggers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
