A production-ready Rib Knit for Cycling Jerseys, specified around aerodynamic fit with a stable print surface. Composition is nylon 66 filament with high tenacity spandex, which delivers higher melt point and better abrasion resistance for demanding uses. Every lot is finished and tested so that Four-Way Stretch Recovery is measurable rather than claimed.
Nylon 66 High Tenacity Spandex 260 GSM Rib Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Four-Way Stretch Recovery Rib Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Rib Knit (a rib knit) |
| Weight | 260 GSM |
| Width | 160 cm |
| Function | Four-Way Stretch Recovery — extends in both directions and returns without bagging |
| Performance target | less than 5% growth after repeated extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | recovery tested on a worn garment, not only on flat fabric |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a rib knit means high extension across the width with clean recovery, ideal for cuffs and bands, and that structure is what allows the fabric to extends in both directions and returns without bagging under the conditions Cycling Jerseys actually face.
Rib Knit construction shown at close range
Performance features
- Four-Way Stretch Recovery: extends in both directions and returns without bagging, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: high extension across the width with clean recovery, ideal for cuffs and bands.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Cycling Jerseys, where aerodynamic fit with a stable print surface is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Four-Way Stretch Recovery fabric prepared for Cycling Jerseys production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
