Developed for Cycling Jerseys, this Interlock Knit answers the most common brief we receive: aerodynamic fit with a stable print surface. The yarn package is nylon 66 filament with high tenacity spandex, chosen because it provides higher melt point and better abrasion resistance for demanding uses, and the finished cloth is set and tested so that Compression.
Nylon 66 High Tenacity Spandex 240 GSM Interlock Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Compression Interlock Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Interlock Knit (a double-bed interlock knit) |
| Weight | 240 GSM |
| Width | 150 cm |
| Function | Compression — delivers graduated support while remaining easy to put on |
| Performance target | recovery above 92% after 100% extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | power measured in the 15-25 N range at 30% extension |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a double-bed interlock knit is used, the fabric behaves consistently across the roll: identical faces on both sides, so the fabric stays opaque under tension. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Interlock Knit construction shown at close range
Performance features
- Compression: delivers graduated support while remaining easy to put on, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: identical faces on both sides, so the fabric stays opaque under tension.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Cycling Jerseys and for the accessories around them. aerodynamic fit with a stable print surface is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Compression fabric prepared for Cycling Jerseys production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
