Nylon 66 High Tenacity Spandex Moisture-Wicking Interlock Knit is a double-bed interlock knit developed for Training Shorts where abrasion resistance plus a comfortable liner decides whether a style succeeds. The base is nylon 66 filament with high tenacity spandex, which gives higher melt point and better abrasion resistance for demanding uses. The result is a fabric that delivers Moisture-Wicking in daily use rather than only in a laboratory.
Nylon 66 High Tenacity Spandex 240 GSM Interlock Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Moisture-Wicking Interlock Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Interlock Knit (a double-bed interlock knit) |
| Weight | 240 GSM |
| Width | 150 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a double-bed interlock knit means identical faces on both sides, so the fabric stays opaque under tension, and that structure is what allows the fabric to moves sweat from the skin to the outer face so the wearer stays dry under the conditions Training Shorts actually face.
Interlock Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: identical faces on both sides, so the fabric stays opaque under tension.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Training Shorts, where abrasion resistance plus a comfortable liner is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Moisture-Wicking fabric prepared for Training Shorts production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
