Developed for Base Layers, this Single Jersey Knit answers the most common brief we receive: next-to-skin comfort with continuous moisture movement. The yarn package is nylon 66 filament with high tenacity spandex, chosen because it provides higher melt point and better abrasion resistance for demanding uses, and the finished cloth is set and tested so that Quick-Dry.
Nylon 66 High Tenacity Spandex 150 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon 66 High Tenacity Spandex Quick-Dry Single Jersey Knit |
| Composition | nylon 66 filament with high tenacity spandex |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 150 GSM |
| Width | 165 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. nylon 66 filament with high tenacity spandex supplies the base behaviour, a plain single-bed knit sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Single Jersey Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: higher melt point and better abrasion resistance for demanding uses.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Base Layers, and suited to any programme where next-to-skin comfort with continuous moisture movement is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
Quick-Dry fabric prepared for Base Layers production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
