Polyester Elastane Chitosan Finish Quick-Dry French Terry Knit combines polyester elastane with a bio-based chitosan finish with a French Terry Knit construction. It is aimed at Yoga Sets that require a soft hand with modest, sustained stretch, and the reason is straightforward: a bio-derived antibacterial route for restricted substance sensitive programmes, so Quick-Dry.
Polyester Elastane Chitosan Finish 320 GSM French Terry Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Elastane Chitosan Finish Quick-Dry French Terry Knit |
| Composition | polyester elastane with a bio-based chitosan finish |
| Construction | French Terry Knit (a looped back French terry) |
| Weight | 320 GSM |
| Width | 175 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a looped back French terry means absorbency on the inside with a flat, printable outer face, and that structure is what allows the fabric to releases absorbed moisture fast enough to be ready for the next session under the conditions Yoga Sets actually face.
French Terry Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: a bio-derived antibacterial route for restricted substance sensitive programmes.
- Construction benefit: absorbency on the inside with a flat, printable outer face.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Yoga Sets, where a soft hand with modest, sustained stretch is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Quick-Dry fabric prepared for Yoga Sets production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
