A production-ready Seamless Circular Knit for Team Uniforms, specified around durability, colour consistency and easy care. Composition is nylon spandex with copper bearing filament, which delivers antibacterial action plus faster heat transfer away from the skin. Every lot is finished and tested so that Moisture-Wicking is measurable rather than claimed.
Nylon Spandex Copper Ion Filament 250 GSM Seamless Circular Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon Spandex Copper Ion Filament Moisture-Wicking Seamless Circular Knit |
| Composition | nylon spandex with copper bearing filament |
| Construction | Seamless Circular Knit (a seamless circular knit) |
| Weight | 250 GSM |
| Width | 175 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a seamless circular knit is used, the fabric behaves consistently across the roll: tubular production that removes the side seam entirely. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Seamless Circular Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: antibacterial action plus faster heat transfer away from the skin.
- Construction benefit: tubular production that removes the side seam entirely.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Team Uniforms and for the accessories around them. durability, colour consistency and easy care is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Team Uniforms production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
