This Brushed Fleece Knit is built for brands whose Base Layers programme needs next-to-skin comfort with continuous moisture movement without a complicated supply chain. Knitted from polyester spandex with graphene modified filament, it offers thermal regulation and far infrared behaviour from the yarn itself, and the construction is engineered so that Thermal Brushed.
Polyester Spandex Graphene Filament 320 GSM Brushed Fleece Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Spandex Graphene Filament Thermal Brushed Brushed Fleece Knit |
| Composition | polyester spandex with graphene modified filament |
| Construction | Brushed Fleece Knit (a brushed back fleece knit) |
| Weight | 320 GSM |
| Width | 165 cm |
| Function | Thermal Brushed — traps warm air while staying light enough for active use |
| Performance target | thermal resistance above 0.08 m2K/W |
| Test method | ISO 11092 thermal resistance |
| Additional value | warmth-to-weight ratio better than a standard fleece |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a brushed back fleece knit is used, the fabric behaves consistently across the roll: a soft inner face that traps warm air without heavy weight. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Brushed Fleece Knit construction shown at close range
Performance features
- Thermal Brushed: traps warm air while staying light enough for active use, measured by ISO 11092 thermal resistance.
- Hand and comfort: thermal regulation and far infrared behaviour from the yarn itself.
- Construction benefit: a soft inner face that traps warm air without heavy weight.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Base Layers and for the accessories around them. next-to-skin comfort with continuous moisture movement is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Thermal Brushed fabric prepared for Base Layers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
