Recycled Polyester Coffee Yarn Thermal Brushed Ponte Roma Knit is a firm ponte roma double knit developed for Team Uniforms where durability, colour consistency and easy care decides whether a style succeeds. The base is recycled polyester spandex with coffee ground filament, which gives odour control combined with a credible recycled content story. The result is a fabric that delivers Thermal Brushed in daily use rather than only in a laboratory.
Recycled Polyester Coffee Yarn 310 GSM Ponte Roma Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Recycled Polyester Coffee Yarn Thermal Brushed Ponte Roma Knit |
| Composition | recycled polyester spandex with coffee ground filament |
| Construction | Ponte Roma Knit (a firm ponte roma double knit) |
| Weight | 310 GSM |
| Width | 155 cm |
| Function | Thermal Brushed — traps warm air while staying light enough for active use |
| Performance target | thermal resistance above 0.08 m2K/W |
| Test method | ISO 11092 thermal resistance |
| Additional value | warmth-to-weight ratio better than a standard fleece |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a firm ponte roma double knit is used, the fabric behaves consistently across the roll: a clean, structured surface with enough hold for tailored athleisure. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Ponte Roma Knit construction shown at close range
Performance features
- Thermal Brushed: traps warm air while staying light enough for active use, measured by ISO 11092 thermal resistance.
- Hand and comfort: odour control combined with a credible recycled content story.
- Construction benefit: a clean, structured surface with enough hold for tailored athleisure.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Team Uniforms and for the accessories around them. durability, colour consistency and easy care is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Thermal Brushed fabric prepared for Team Uniforms production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
