Developed for Tennis and Golf Wear, this Power Mesh Knit answers the most common brief we receive: sun protection with a clean, structured appearance. The yarn package is recycled polyester spandex with coffee ground filament, chosen because it provides odour control combined with a credible recycled content story, and the finished cloth is set and tested so that Cooling Ice-Feel.
Recycled Polyester Coffee Yarn 130 GSM Power Mesh Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Recycled Polyester Coffee Yarn Cooling Ice-Feel Power Mesh Knit |
| Composition | recycled polyester spandex with coffee ground filament |
| Construction | Power Mesh Knit (a high modulus warp knit mesh) |
| Weight | 130 GSM |
| Width | 165 cm |
| Function | Cooling Ice-Feel — gives an instant cool touch and spreads heat away from the body |
| Performance target | Q-max above 0.20 W/cm2 |
| Test method | contact cool feeling measurement (Q-max) |
| Additional value | thermal conductivity improved by yarn selection rather than by a finish |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a high modulus warp knit mesh means controlled support at very low weight with maximum air exchange, and that structure is what allows the fabric to gives an instant cool touch and spreads heat away from the body under the conditions Tennis and Golf Wear actually face.
Power Mesh Knit construction shown at close range
Performance features
- Cooling Ice-Feel: gives an instant cool touch and spreads heat away from the body, measured by contact cool feeling measurement (Q-max).
- Hand and comfort: odour control combined with a credible recycled content story.
- Construction benefit: controlled support at very low weight with maximum air exchange.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Tennis and Golf Wear, where sun protection with a clean, structured appearance is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Cooling Ice-Feel fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
