Recycled Polyester Coffee Yarn Quick-Dry Single Jersey Knit is a plain single-bed knit developed for Base Layers where next-to-skin comfort with continuous moisture movement decides whether a style succeeds. The base is recycled polyester spandex with coffee ground filament, which gives odour control combined with a credible recycled content story. The result is a fabric that delivers Quick-Dry in daily use rather than only in a laboratory.
Recycled Polyester Coffee Yarn 160 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Recycled Polyester Coffee Yarn Quick-Dry Single Jersey Knit |
| Composition | recycled polyester spandex with coffee ground filament |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 160 GSM |
| Width | 170 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a plain single-bed knit is used, the fabric behaves consistently across the roll: the lightest way to get coverage, with good stretch and a clean surface for printing. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Single Jersey Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: odour control combined with a credible recycled content story.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Base Layers and for the accessories around them. next-to-skin comfort with continuous moisture movement is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Quick-Dry fabric prepared for Base Layers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
