A production-ready Pique Knit for Tennis and Golf Wear, specified around sun protection with a clean, structured appearance. Composition is polyester spandex with charcoal loaded filament, which delivers permanent odour adsorption built into the yarn rather than the finish. Every lot is finished and tested so that UPF 50+ Sun Protection is measurable rather than claimed.
Polyester Spandex Bamboo Charcoal 240 GSM Pique Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Spandex Bamboo Charcoal UPF 50+ Sun Protection Pique Knit |
| Composition | polyester spandex with charcoal loaded filament |
| Construction | Pique Knit (a textured pique knit) |
| Weight | 240 GSM |
| Width | 160 cm |
| Function | UPF 50+ Sun Protection — blocks ultraviolet radiation for outdoor training |
| Performance target | UPF rating above 50 with UVA below 5% |
| Test method | AATCC 183 ultraviolet transmittance |
| Additional value | protection held after 40 washes and in the wet state |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. polyester spandex with charcoal loaded filament supplies the base behaviour, a textured pique knit sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Pique Knit construction shown at close range
Performance features
- UPF 50+ Sun Protection: blocks ultraviolet radiation for outdoor training, measured by AATCC 183 ultraviolet transmittance.
- Hand and comfort: permanent odour adsorption built into the yarn rather than the finish.
- Construction benefit: a structured surface that hides perspiration and holds shape.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Tennis and Golf Wear, and suited to any programme where sun protection with a clean, structured appearance is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
UPF 50+ Sun Protection fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
