Polyester Spandex Bamboo Charcoal Moisture-Wicking Tricot Warp Knit combines polyester spandex with charcoal loaded filament with a Tricot Warp Knit construction. It is aimed at Sports Bras that require controlled support and soft contact at the underband, and the reason is straightforward: permanent odour adsorption built into the yarn rather than the finish, so Moisture-Wicking.
Polyester Spandex Bamboo Charcoal 180 GSM Tricot Warp Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Spandex Bamboo Charcoal Moisture-Wicking Tricot Warp Knit |
| Composition | polyester spandex with charcoal loaded filament |
| Construction | Tricot Warp Knit (a warp knitted tricot) |
| Weight | 180 GSM |
| Width | 165 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a warp knitted tricot is used, the fabric behaves consistently across the roll: low curl, smooth and stable, which makes it easy to cut and bond. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Tricot Warp Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: permanent odour adsorption built into the yarn rather than the finish.
- Construction benefit: low curl, smooth and stable, which makes it easy to cut and bond.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Sports Bras and for the accessories around them. controlled support and soft contact at the underband is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Sports Bras production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
