Polyester Spandex Bamboo Charcoal UPF 50+ Sun Protection Single Jersey Knit is a plain single-bed knit developed for Tennis and Golf Wear where sun protection with a clean, structured appearance decides whether a style succeeds. The base is polyester spandex with charcoal loaded filament, which gives permanent odour adsorption built into the yarn rather than the finish. The result is a fabric that delivers UPF 50+ Sun Protection in daily use rather than only in a laboratory.
Polyester Spandex Bamboo Charcoal 190 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Spandex Bamboo Charcoal UPF 50+ Sun Protection Single Jersey Knit |
| Composition | polyester spandex with charcoal loaded filament |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 190 GSM |
| Width | 175 cm |
| Function | UPF 50+ Sun Protection — blocks ultraviolet radiation for outdoor training |
| Performance target | UPF rating above 50 with UVA below 5% |
| Test method | AATCC 183 ultraviolet transmittance |
| Additional value | protection held after 40 washes and in the wet state |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a plain single-bed knit is used, the fabric behaves consistently across the roll: the lightest way to get coverage, with good stretch and a clean surface for printing. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Single Jersey Knit construction shown at close range
Performance features
- UPF 50+ Sun Protection: blocks ultraviolet radiation for outdoor training, measured by AATCC 183 ultraviolet transmittance.
- Hand and comfort: permanent odour adsorption built into the yarn rather than the finish.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Tennis and Golf Wear and for the accessories around them. sun protection with a clean, structured appearance is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
UPF 50+ Sun Protection fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
