This French Terry Knit is built for brands whose Tennis and Golf Wear programme needs sun protection with a clean, structured appearance without a complicated supply chain. Knitted from 87% polyester / 13% spandex, brushed face, it offers a peach-skin surface without any heavy softening bath, and the construction is engineered so that Quick-Dry.
87% Polyester 13% Spandex Brushed 310 GSM French Terry Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 87% Polyester 13% Spandex Brushed Quick-Dry French Terry Knit |
| Composition | 87% polyester / 13% spandex, brushed face |
| Construction | French Terry Knit (a looped back French terry) |
| Weight | 310 GSM |
| Width | 165 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a looped back French terry means absorbency on the inside with a flat, printable outer face, and that structure is what allows the fabric to releases absorbed moisture fast enough to be ready for the next session under the conditions Tennis and Golf Wear actually face.
French Terry Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: a peach-skin surface without any heavy softening bath.
- Construction benefit: absorbency on the inside with a flat, printable outer face.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Tennis and Golf Wear, where sun protection with a clean, structured appearance is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Quick-Dry fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
