Polyester Polyamide Elastane Blend Quick-Dry Single Jersey Knit combines 50% polyester / 42% polyamide / 8% elastane with a Single Jersey Knit construction. It is aimed at Base Layers that require next-to-skin comfort with continuous moisture movement, and the reason is straightforward: a dense surface that takes sublimation print cleanly, so Quick-Dry.
Polyester Polyamide Elastane Blend 170 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Polyester Polyamide Elastane Blend Quick-Dry Single Jersey Knit |
| Composition | 50% polyester / 42% polyamide / 8% elastane |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 170 GSM |
| Width | 150 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a plain single-bed knit means the lightest way to get coverage, with good stretch and a clean surface for printing, and that structure is what allows the fabric to releases absorbed moisture fast enough to be ready for the next session under the conditions Base Layers actually face.
Single Jersey Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: a dense surface that takes sublimation print cleanly.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Base Layers, where next-to-skin comfort with continuous moisture movement is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Quick-Dry fabric prepared for Base Layers production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
