A production-ready Spacer Knit for Training Shorts, specified around abrasion resistance plus a comfortable liner. Composition is 92% GRS recycled polyester / 8% spandex, which delivers bottle-to-fabric traceability with full chain of custody records. Every lot is finished and tested so that Breathable Mesh is measurable rather than claimed.
92% Recycled Polyester 8% Spandex 340 GSM Spacer Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 92% Recycled Polyester 8% Spandex Breathable Mesh Spacer Knit |
| Composition | 92% GRS recycled polyester / 8% spandex |
| Construction | Spacer Knit (a spacer knit with two faces) |
| Weight | 340 GSM |
| Width | 155 cm |
| Function | Breathable Mesh — keeps air moving across the skin in high heat zones |
| Performance target | air permeability above 400 mm/s |
| Test method | ISO 11092 thermal and water vapour resistance |
| Additional value | ventilation mapped to the pattern rather than added as an afterthought |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a spacer knit with two faces means cushioning and airflow built into a single piece of fabric, and that structure is what allows the fabric to keeps air moving across the skin in high heat zones under the conditions Training Shorts actually face.
Spacer Knit construction shown at close range
Performance features
- Breathable Mesh: keeps air moving across the skin in high heat zones, measured by ISO 11092 thermal and water vapour resistance.
- Hand and comfort: bottle-to-fabric traceability with full chain of custody records.
- Construction benefit: cushioning and airflow built into a single piece of fabric.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Training Shorts, where abrasion resistance plus a comfortable liner is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Breathable Mesh fabric prepared for Training Shorts production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
