This French Terry Knit is built for brands whose Base Layers programme needs next-to-skin comfort with continuous moisture movement without a complicated supply chain. Knitted from 90% polyester filament / 10% spandex, it offers stable dimensions and easy care at a competitive price, and the construction is engineered so that Quick-Dry.
90% Polyester 10% Spandex 280 GSM French Terry Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 90% Polyester 10% Spandex Quick-Dry French Terry Knit |
| Composition | 90% polyester filament / 10% spandex |
| Construction | French Terry Knit (a looped back French terry) |
| Weight | 280 GSM |
| Width | 165 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a looped back French terry is used, the fabric behaves consistently across the roll: absorbency on the inside with a flat, printable outer face. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
French Terry Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: stable dimensions and easy care at a competitive price.
- Construction benefit: absorbency on the inside with a flat, printable outer face.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Base Layers and for the accessories around them. next-to-skin comfort with continuous moisture movement is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Quick-Dry fabric prepared for Base Layers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
