A production-ready Ponte Roma Knit for Leggings, specified around squat-proof coverage and recovery at the knee and seat. Composition is 88% polyester filament / 12% spandex, which delivers the workhorse blend for training ranges that wash repeatedly. Every lot is finished and tested so that Four-Way Stretch Recovery is measurable rather than claimed.
88% Polyester 12% Spandex 340 GSM Ponte Roma Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 88% Polyester 12% Spandex Four-Way Stretch Recovery Ponte Roma Knit |
| Composition | 88% polyester filament / 12% spandex |
| Construction | Ponte Roma Knit (a firm ponte roma double knit) |
| Weight | 340 GSM |
| Width | 150 cm |
| Function | Four-Way Stretch Recovery — extends in both directions and returns without bagging |
| Performance target | less than 5% growth after repeated extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | recovery tested on a worn garment, not only on flat fabric |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a firm ponte roma double knit is used, the fabric behaves consistently across the roll: a clean, structured surface with enough hold for tailored athleisure. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Ponte Roma Knit construction shown at close range
Performance features
- Four-Way Stretch Recovery: extends in both directions and returns without bagging, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: the workhorse blend for training ranges that wash repeatedly.
- Construction benefit: a clean, structured surface with enough hold for tailored athleisure.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Leggings and for the accessories around them. squat-proof coverage and recovery at the knee and seat is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Four-Way Stretch Recovery fabric prepared for Leggings production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
