88% Polyester 12% Spandex Quick-Dry Power Mesh Knit combines 88% polyester filament / 12% spandex with a Power Mesh Knit construction. It is aimed at Swimwear that require chlorine and sunscreen resistance with shape retention, and the reason is straightforward: the workhorse blend for training ranges that wash repeatedly, so Quick-Dry.
88% Polyester 12% Spandex 160 GSM Power Mesh Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 88% Polyester 12% Spandex Quick-Dry Power Mesh Knit |
| Composition | 88% polyester filament / 12% spandex |
| Construction | Power Mesh Knit (a high modulus warp knit mesh) |
| Weight | 160 GSM |
| Width | 170 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. 88% polyester filament / 12% spandex supplies the base behaviour, a high modulus warp knit mesh sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Power Mesh Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: the workhorse blend for training ranges that wash repeatedly.
- Construction benefit: controlled support at very low weight with maximum air exchange.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Swimwear, and suited to any programme where chlorine and sunscreen resistance with shape retention is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
Quick-Dry fabric prepared for Swimwear production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
