Developed for Training Shorts, this Interlock Knit answers the most common brief we receive: abrasion resistance plus a comfortable liner. The yarn package is 88% polyester filament / 12% spandex, chosen because it provides the workhorse blend for training ranges that wash repeatedly, and the finished cloth is set and tested so that Moisture-Wicking.
88% Polyester 12% Spandex 280 GSM Interlock Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 88% Polyester 12% Spandex Moisture-Wicking Interlock Knit |
| Composition | 88% polyester filament / 12% spandex |
| Construction | Interlock Knit (a double-bed interlock knit) |
| Weight | 280 GSM |
| Width | 165 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a double-bed interlock knit is used, the fabric behaves consistently across the roll: identical faces on both sides, so the fabric stays opaque under tension. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Interlock Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: the workhorse blend for training ranges that wash repeatedly.
- Construction benefit: identical faces on both sides, so the fabric stays opaque under tension.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Training Shorts and for the accessories around them. abrasion resistance plus a comfortable liner is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Training Shorts production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
