88% Polyester 12% Spandex Antibacterial Anti-Odor Single Jersey Knit combines 88% polyester filament / 12% spandex with a Single Jersey Knit construction. It is aimed at Sports Bras that require controlled support and soft contact at the underband, and the reason is straightforward: the workhorse blend for training ranges that wash repeatedly, so Antibacterial Anti-Odor.
88% Polyester 12% Spandex 190 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 88% Polyester 12% Spandex Antibacterial Anti-Odor Single Jersey Knit |
| Composition | 88% polyester filament / 12% spandex |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 190 GSM |
| Width | 175 cm |
| Function | Antibacterial Anti-Odor — stops the bacteria that turn sweat into odour |
| Performance target | bacterial reduction above 99% |
| Test method | ISO 20743 antibacterial test |
| Additional value | performance retained after 30 home washes |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a plain single-bed knit means the lightest way to get coverage, with good stretch and a clean surface for printing, and that structure is what allows the fabric to stops the bacteria that turn sweat into odour under the conditions Sports Bras actually face.
Single Jersey Knit construction shown at close range
Performance features
- Antibacterial Anti-Odor: stops the bacteria that turn sweat into odour, measured by ISO 20743 antibacterial test.
- Hand and comfort: the workhorse blend for training ranges that wash repeatedly.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Sports Bras, where controlled support and soft contact at the underband is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Antibacterial Anti-Odor fabric prepared for Sports Bras production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
