A production-ready Ponte Roma Knit for Running Tops, specified around low weight with fast moisture transport. Composition is 55% nylon / 35% polyester / 10% spandex, which delivers a cost-balanced hand with better abrasion life than straight nylon. Every lot is finished and tested so that Compression is measurable rather than claimed.
Nylon Polyester Spandex Tri-Blend 330 GSM Ponte Roma Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon Polyester Spandex Tri-Blend Compression Ponte Roma Knit |
| Composition | 55% nylon / 35% polyester / 10% spandex |
| Construction | Ponte Roma Knit (a firm ponte roma double knit) |
| Weight | 330 GSM |
| Width | 160 cm |
| Function | Compression — delivers graduated support while remaining easy to put on |
| Performance target | recovery above 92% after 100% extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | power measured in the 15-25 N range at 30% extension |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a firm ponte roma double knit means a clean, structured surface with enough hold for tailored athleisure, and that structure is what allows the fabric to delivers graduated support while remaining easy to put on under the conditions Running Tops actually face.
Ponte Roma Knit construction shown at close range
Performance features
- Compression: delivers graduated support while remaining easy to put on, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: a cost-balanced hand with better abrasion life than straight nylon.
- Construction benefit: a clean, structured surface with enough hold for tailored athleisure.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Running Tops, where low weight with fast moisture transport is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Compression fabric prepared for Running Tops production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
