Nylon Polyester Spandex Tri-Blend Breathable Mesh Power Mesh Knit combines 55% nylon / 35% polyester / 10% spandex with a Power Mesh Knit construction. It is aimed at Tennis and Golf Wear that require sun protection with a clean, structured appearance, and the reason is straightforward: a cost-balanced hand with better abrasion life than straight nylon, so Breathable Mesh.
Nylon Polyester Spandex Tri-Blend 150 GSM Power Mesh Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon Polyester Spandex Tri-Blend Breathable Mesh Power Mesh Knit |
| Composition | 55% nylon / 35% polyester / 10% spandex |
| Construction | Power Mesh Knit (a high modulus warp knit mesh) |
| Weight | 150 GSM |
| Width | 175 cm |
| Function | Breathable Mesh — keeps air moving across the skin in high heat zones |
| Performance target | air permeability above 400 mm/s |
| Test method | ISO 11092 thermal and water vapour resistance |
| Additional value | ventilation mapped to the pattern rather than added as an afterthought |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a high modulus warp knit mesh is used, the fabric behaves consistently across the roll: controlled support at very low weight with maximum air exchange. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Power Mesh Knit construction shown at close range
Performance features
- Breathable Mesh: keeps air moving across the skin in high heat zones, measured by ISO 11092 thermal and water vapour resistance.
- Hand and comfort: a cost-balanced hand with better abrasion life than straight nylon.
- Construction benefit: controlled support at very low weight with maximum air exchange.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Tennis and Golf Wear and for the accessories around them. sun protection with a clean, structured appearance is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Breathable Mesh fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
