This Tricot Warp Knit is built for brands whose Base Layers programme needs next-to-skin comfort with continuous moisture movement without a complicated supply chain. Knitted from 55% nylon / 35% polyester / 10% spandex, it offers a cost-balanced hand with better abrasion life than straight nylon, and the construction is engineered so that Moisture-Wicking.
Nylon Polyester Spandex Tri-Blend 170 GSM Tricot Warp Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon Polyester Spandex Tri-Blend Moisture-Wicking Tricot Warp Knit |
| Composition | 55% nylon / 35% polyester / 10% spandex |
| Construction | Tricot Warp Knit (a warp knitted tricot) |
| Weight | 170 GSM |
| Width | 155 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a warp knitted tricot is used, the fabric behaves consistently across the roll: low curl, smooth and stable, which makes it easy to cut and bond. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Tricot Warp Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: a cost-balanced hand with better abrasion life than straight nylon.
- Construction benefit: low curl, smooth and stable, which makes it easy to cut and bond.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Base Layers and for the accessories around them. next-to-skin comfort with continuous moisture movement is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Base Layers production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
