Nylon Polyester Spandex Tri-Blend Four-Way Stretch Recovery Rib Knit is a rib knit developed for Running Tops where low weight with fast moisture transport decides whether a style succeeds. The base is 55% nylon / 35% polyester / 10% spandex, which gives a cost-balanced hand with better abrasion life than straight nylon. The result is a fabric that delivers Four-Way Stretch Recovery in daily use rather than only in a laboratory.
Nylon Polyester Spandex Tri-Blend 290 GSM Rib Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | Nylon Polyester Spandex Tri-Blend Four-Way Stretch Recovery Rib Knit |
| Composition | 55% nylon / 35% polyester / 10% spandex |
| Construction | Rib Knit (a rib knit) |
| Weight | 290 GSM |
| Width | 175 cm |
| Function | Four-Way Stretch Recovery — extends in both directions and returns without bagging |
| Performance target | less than 5% growth after repeated extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | recovery tested on a worn garment, not only on flat fabric |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a rib knit means high extension across the width with clean recovery, ideal for cuffs and bands, and that structure is what allows the fabric to extends in both directions and returns without bagging under the conditions Running Tops actually face.
Rib Knit construction shown at close range
Performance features
- Four-Way Stretch Recovery: extends in both directions and returns without bagging, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: a cost-balanced hand with better abrasion life than straight nylon.
- Construction benefit: high extension across the width with clean recovery, ideal for cuffs and bands.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Running Tops, where low weight with fast moisture transport is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Four-Way Stretch Recovery fabric prepared for Running Tops production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
