A production-ready French Terry Knit for Training Shorts, specified around abrasion resistance plus a comfortable liner. Composition is 78% GRS recycled nylon / 22% spandex, which delivers virgin nylon performance with a documented recycled content claim. Every lot is finished and tested so that Quick-Dry is measurable rather than claimed.
78% Recycled Nylon 22% Spandex 300 GSM French Terry Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 78% Recycled Nylon 22% Spandex Quick-Dry French Terry Knit |
| Composition | 78% GRS recycled nylon / 22% spandex |
| Construction | French Terry Knit (a looped back French terry) |
| Weight | 300 GSM |
| Width | 165 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a looped back French terry is used, the fabric behaves consistently across the roll: absorbency on the inside with a flat, printable outer face. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
French Terry Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: virgin nylon performance with a documented recycled content claim.
- Construction benefit: absorbency on the inside with a flat, printable outer face.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Training Shorts and for the accessories around them. abrasion resistance plus a comfortable liner is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Quick-Dry fabric prepared for Training Shorts production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
