This Single Jersey Knit is built for brands whose Team Uniforms programme needs durability, colour consistency and easy care without a complicated supply chain. Knitted from 78% GRS recycled nylon / 22% spandex, it offers virgin nylon performance with a documented recycled content claim, and the construction is engineered so that Moisture-Wicking.
78% Recycled Nylon 22% Spandex 170 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 78% Recycled Nylon 22% Spandex Moisture-Wicking Single Jersey Knit |
| Composition | 78% GRS recycled nylon / 22% spandex |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 170 GSM |
| Width | 160 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a plain single-bed knit is used, the fabric behaves consistently across the roll: the lightest way to get coverage, with good stretch and a clean surface for printing. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Single Jersey Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: virgin nylon performance with a documented recycled content claim.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Team Uniforms and for the accessories around them. durability, colour consistency and easy care is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Moisture-Wicking fabric prepared for Team Uniforms production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
