75% Nylon 25% Spandex Compression Jacquard Knit combines 75% nylon 6 filament / 25% spandex with a Jacquard Knit construction. It is aimed at Hoodies and Joggers that require warmth without bulk and a stable brushed surface, and the reason is straightforward: higher power for compression grades that still run on standard knitting machines, so Compression.
75% Nylon 25% Spandex 270 GSM Jacquard Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex Compression Jacquard Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Jacquard Knit (a patterned jacquard knit) |
| Weight | 270 GSM |
| Width | 155 cm |
| Function | Compression — delivers graduated support while remaining easy to put on |
| Performance target | recovery above 92% after 100% extension |
| Test method | ASTM D2594 stretch and recovery |
| Additional value | power measured in the 15-25 N range at 30% extension |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a patterned jacquard knit means zoned structure and ventilation placed exactly where the pattern requires, and that structure is what allows the fabric to delivers graduated support while remaining easy to put on under the conditions Hoodies and Joggers actually face.
Jacquard Knit construction shown at close range
Performance features
- Compression: delivers graduated support while remaining easy to put on, measured by ASTM D2594 stretch and recovery.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: zoned structure and ventilation placed exactly where the pattern requires.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Hoodies and Joggers, where warmth without bulk and a stable brushed surface is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Compression fabric prepared for Hoodies and Joggers production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
