This Spacer Knit is built for brands whose Sports Bras programme needs controlled support and soft contact at the underband without a complicated supply chain. Knitted from 75% nylon 6 filament / 25% spandex, it offers higher power for compression grades that still run on standard knitting machines, and the construction is engineered so that Thermal Brushed.
75% Nylon 25% Spandex 340 GSM Spacer Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex Thermal Brushed Spacer Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Spacer Knit (a spacer knit with two faces) |
| Weight | 340 GSM |
| Width | 155 cm |
| Function | Thermal Brushed — traps warm air while staying light enough for active use |
| Performance target | thermal resistance above 0.08 m2K/W |
| Test method | ISO 11092 thermal resistance |
| Additional value | warmth-to-weight ratio better than a standard fleece |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a spacer knit with two faces is used, the fabric behaves consistently across the roll: cushioning and airflow built into a single piece of fabric. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Spacer Knit construction shown at close range
Performance features
- Thermal Brushed: traps warm air while staying light enough for active use, measured by ISO 11092 thermal resistance.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: cushioning and airflow built into a single piece of fabric.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Sports Bras and for the accessories around them. controlled support and soft contact at the underband is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Thermal Brushed fabric prepared for Sports Bras production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
