Developed for Training Shorts, this Tricot Warp Knit answers the most common brief we receive: abrasion resistance plus a comfortable liner. The yarn package is 75% nylon 6 filament / 25% spandex, chosen because it provides higher power for compression grades that still run on standard knitting machines, and the finished cloth is set and tested so that Quick-Dry.
75% Nylon 25% Spandex 150 GSM Tricot Warp Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex Quick-Dry Tricot Warp Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Tricot Warp Knit (a warp knitted tricot) |
| Weight | 150 GSM |
| Width | 155 cm |
| Function | Quick-Dry — releases absorbed moisture fast enough to be ready for the next session |
| Performance target | residual moisture below 15% after 30 minutes |
| Test method | AATCC 199 drying rate |
| Additional value | drying time roughly half that of a cotton equivalent |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. 75% nylon 6 filament / 25% spandex supplies the base behaviour, a warp knitted tricot sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Tricot Warp Knit construction shown at close range
Performance features
- Quick-Dry: releases absorbed moisture fast enough to be ready for the next session, measured by AATCC 199 drying rate.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: low curl, smooth and stable, which makes it easy to cut and bond.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Training Shorts, and suited to any programme where abrasion resistance plus a comfortable liner is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
Quick-Dry fabric prepared for Training Shorts production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
