This Pique Knit is built for brands whose Training Shorts programme needs abrasion resistance plus a comfortable liner without a complicated supply chain. Knitted from 75% nylon 6 filament / 25% spandex, it offers higher power for compression grades that still run on standard knitting machines, and the construction is engineered so that UPF 50+ Sun Protection.
75% Nylon 25% Spandex 210 GSM Pique Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex UPF 50+ Sun Protection Pique Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Pique Knit (a textured pique knit) |
| Weight | 210 GSM |
| Width | 165 cm |
| Function | UPF 50+ Sun Protection — blocks ultraviolet radiation for outdoor training |
| Performance target | UPF rating above 50 with UVA below 5% |
| Test method | AATCC 183 ultraviolet transmittance |
| Additional value | protection held after 40 washes and in the wet state |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a textured pique knit is used, the fabric behaves consistently across the roll: a structured surface that hides perspiration and holds shape. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Pique Knit construction shown at close range
Performance features
- UPF 50+ Sun Protection: blocks ultraviolet radiation for outdoor training, measured by AATCC 183 ultraviolet transmittance.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: a structured surface that hides perspiration and holds shape.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Training Shorts and for the accessories around them. abrasion resistance plus a comfortable liner is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
UPF 50+ Sun Protection fabric prepared for Training Shorts production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
