A production-ready Interlock Knit for Team Uniforms, specified around durability, colour consistency and easy care. Composition is 75% nylon 6 filament / 25% spandex, which delivers higher power for compression grades that still run on standard knitting machines. Every lot is finished and tested so that Antibacterial Anti-Odor is measurable rather than claimed.
75% Nylon 25% Spandex 250 GSM Interlock Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex Antibacterial Anti-Odor Interlock Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Interlock Knit (a double-bed interlock knit) |
| Weight | 250 GSM |
| Width | 150 cm |
| Function | Antibacterial Anti-Odor — stops the bacteria that turn sweat into odour |
| Performance target | bacterial reduction above 99% |
| Test method | ISO 20743 antibacterial test |
| Additional value | performance retained after 30 home washes |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Because a double-bed interlock knit is used, the fabric behaves consistently across the roll: identical faces on both sides, so the fabric stays opaque under tension. That consistency is what lets a factory cut confidently and lets a brand repeat an order a season later with the same result.
Interlock Knit construction shown at close range
Performance features
- Antibacterial Anti-Odor: stops the bacteria that turn sweat into odour, measured by ISO 20743 antibacterial test.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: identical faces on both sides, so the fabric stays opaque under tension.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Used for Team Uniforms and for the accessories around them. durability, colour consistency and easy care is the reason it is chosen, and the fabric bonds, prints and sews on standard machinery without special settings.
Antibacterial Anti-Odor fabric prepared for Team Uniforms production
Dyeing, finishing and customisation
The fabric can be supplied greige, piece dyed or printed. Add-on finishes are selected after a wash durability trial, because a finish that disappears after five washes is worse than no claim at all.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Minimum trial order is 300 metres per colour and bulk production takes 20-25 days once the approval sample is signed. Documentation includes test reports per lot, OEKO-TEX conformity and full construction sheets.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
