This Single Jersey Knit is built for brands whose Tennis and Golf Wear programme needs sun protection with a clean, structured appearance without a complicated supply chain. Knitted from 75% nylon 6 filament / 25% spandex, it offers higher power for compression grades that still run on standard knitting machines, and the construction is engineered so that UPF 50+ Sun Protection.
75% Nylon 25% Spandex 160 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 75% Nylon 25% Spandex UPF 50+ Sun Protection Single Jersey Knit |
| Composition | 75% nylon 6 filament / 25% spandex |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 160 GSM |
| Width | 160 cm |
| Function | UPF 50+ Sun Protection — blocks ultraviolet radiation for outdoor training |
| Performance target | UPF rating above 50 with UVA below 5% |
| Test method | AATCC 183 ultraviolet transmittance |
| Additional value | protection held after 40 washes and in the wet state |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. 75% nylon 6 filament / 25% spandex supplies the base behaviour, a plain single-bed knit sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Single Jersey Knit construction shown at close range
Performance features
- UPF 50+ Sun Protection: blocks ultraviolet radiation for outdoor training, measured by AATCC 183 ultraviolet transmittance.
- Hand and comfort: higher power for compression grades that still run on standard knitting machines.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Tennis and Golf Wear, and suited to any programme where sun protection with a clean, structured appearance is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
UPF 50+ Sun Protection fabric prepared for Tennis and Golf Wear production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
What is the minimum for a first order? Development starts at 300 metres per colour, which is enough for a proper wear trial and a small capsule. Bulk pricing improves at 1,000 metres and above per colour.
