80% Nylon 20% Spandex Thermal Brushed Brushed Fleece Knit combines 80% nylon 6 filament / 20% spandex with a Brushed Fleece Knit construction. It is aimed at Leggings that require squat-proof coverage and recovery at the knee and seat, and the reason is straightforward: a dry, smooth hand with strong recovery in every direction, so Thermal Brushed.
80% Nylon 20% Spandex 300 GSM Brushed Fleece Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 80% Nylon 20% Spandex Thermal Brushed Brushed Fleece Knit |
| Composition | 80% nylon 6 filament / 20% spandex |
| Construction | Brushed Fleece Knit (a brushed back fleece knit) |
| Weight | 300 GSM |
| Width | 175 cm |
| Function | Thermal Brushed — traps warm air while staying light enough for active use |
| Performance target | thermal resistance above 0.08 m2K/W |
| Test method | ISO 11092 thermal resistance |
| Additional value | warmth-to-weight ratio better than a standard fleece |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
Performance comes from three decisions: the yarn, the stitch and the finishing route. 80% nylon 6 filament / 20% spandex supplies the base behaviour, a brushed back fleece knit sets how air and moisture move, and finishing is kept deliberately light so the attributes survive washing.
Brushed Fleece Knit construction shown at close range
Performance features
- Thermal Brushed: traps warm air while staying light enough for active use, measured by ISO 11092 thermal resistance.
- Hand and comfort: a dry, smooth hand with strong recovery in every direction.
- Construction benefit: a soft inner face that traps warm air without heavy weight.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
Specified mainly for Leggings, and suited to any programme where squat-proof coverage and recovery at the knee and seat is written into the brief. Designers use the same base for matching styles, which keeps colour continuity simple across a collection.
Thermal Brushed fabric prepared for Leggings production
Dyeing, finishing and customisation
Dyeing runs on a controlled recipe with consolidated dye lots to hold shade continuity. Finishing options include wicking, antibacterial, soft touch and anti-pilling, applied after lab trials so the hand approved in sampling is the hand delivered in bulk.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Sampling is fast: A4 hand feel cards, laboratory dips and a 5 metre trial roll within a week. Bulk runs in 20-25 days, with inline inspection and a final random inspection before packing.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Can we get recycled content with this construction? In most cases yes. GRS certified recycled nylon or polyester can replace the virgin yarn with full chain of custody documents, usually with no visible change in hand or performance.
