80% Nylon 20% Spandex Moisture-Wicking Single Jersey Knit is a plain single-bed knit developed for Leggings where squat-proof coverage and recovery at the knee and seat decides whether a style succeeds. The base is 80% nylon 6 filament / 20% spandex, which gives a dry, smooth hand with strong recovery in every direction. The result is a fabric that delivers Moisture-Wicking in daily use rather than only in a laboratory.
80% Nylon 20% Spandex 150 GSM Single Jersey Knit, face view
Key specifications
| Parameter | Value |
|---|---|
| Fabric name | 80% Nylon 20% Spandex Moisture-Wicking Single Jersey Knit |
| Composition | 80% nylon 6 filament / 20% spandex |
| Construction | Single Jersey Knit (a plain single-bed knit) |
| Weight | 150 GSM |
| Width | 150 cm |
| Function | Moisture-Wicking — moves sweat from the skin to the outer face so the wearer stays dry |
| Performance target | moisture management class 4 or above |
| Test method | AATCC 195 moisture management |
| Additional value | one-way transport index above 300 |
| Stretch | Four-way, recovery above 92% |
| Certification | OEKO-TEX Standard 100, REACH compliant inputs |
| MOQ | 300 m per colour |
| Lead time | 20–25 days after approval |
Why this construction works
The construction does the work before any chemistry is added. a plain single-bed knit means the lightest way to get coverage, with good stretch and a clean surface for printing, and that structure is what allows the fabric to moves sweat from the skin to the outer face so the wearer stays dry under the conditions Leggings actually face.
Single Jersey Knit construction shown at close range
Performance features
- Moisture-Wicking: moves sweat from the skin to the outer face so the wearer stays dry, measured by AATCC 195 moisture management.
- Hand and comfort: a dry, smooth hand with strong recovery in every direction.
- Construction benefit: the lightest way to get coverage, with good stretch and a clean surface for printing.
- Consistency: GSM and width tolerance are locked per lot and recorded on the inspection sheet.
- Durability: performance is verified after repeated washing, not only as delivered.
Recommended applications
The first choice for Leggings, where squat-proof coverage and recovery at the knee and seat is the requirement that decides the fabric. It also converts cleanly into coordinated pieces in the same programme, since the hand and the shade run together.
Moisture-Wicking fabric prepared for Leggings production
Dyeing, finishing and customisation
Available in piece dyed, yarn dyed or sublimation ready form. Functional finishes such as moisture management, antibacterial, anti-pilling and UV absorption can be applied individually or combined, and each is verified against its test method before bulk release.
Care instructions
- Machine wash at 30 degrees with mild detergent, no fabric softener.
- Dry away from direct heat and do not tumble dry hot.
- Cool iron on the reverse if needed, and avoid bleach.
Ordering, sampling and quality control
Trial quantity starts at 300 metres per colour with laboratory dips in five working days. Bulk lead time is 20-25 days after approval, and every lot ships with a test report, a shade check and an inspection record.
Roll inspection and packing before shipment
Frequently asked questions
Can the weight and width be changed? Yes. Most programmes run between 140 and 340 GSM, and width can be set between 150 and 180 cm to match your marker. Changing weight changes cover and stretch, so we re-test before confirming.
Is the performance tested on every lot? Yes. The named test method is repeated on bulk fabric, not only on the approval sample, and the report carries the lot number so results can be traced back.
