Compression Decay Solutions for Swimwear: Care and Service Life Advice
Care instructions decide whether compression decay stays solved for the life of the swimwear, not just until delivery.
What shortens performance
the garment loses its support value over the wearing life becomes obvious earlier when the garment is dried hot or washed with softener, because both attack the finish and the elastic. Because the fabric stays wet, stretched and chemically exposed for hours, target checks are made on a worn sample rather than flat fabric alone.
Washing guidance
Wash at 30 degrees inside out with similar colours. Mild detergent preserves the finish applied for compression decay. Keep ISO 13934-1 tensile with cyclic extension named in the tech pack so every lot is measured the same way.
Drying and storage
do not store compressed or folded tightly. Where swimwear is worn for pool training and beach use, set tolerances around that range of movement.
Expected service life
With correct care the target of above 90% elastic recovery after 20000 cycles remains approachable for 40-50 home washes, after which routine replacement is reasonable. Any change to nylon and polyester knits at 190-230 GSM with high elastane requires re-testing against above 90% elastic recovery after 20000 cycles before bulk is released.
Supporting the customer
Print clear care wording and mention ISO 13934-1 tensile with cyclic extension validation on the product page so claims can be supported if questioned. Past reports from ISO 13934-1 tensile with cyclic extension help the mill reproduce the same recipe on the next order.
