Compression Decay Solutions for Sports Bras: Test Methods Explained
Testing is how compression decay is verified for technical sports bras. Knowing what the numbers mean prevents unnecessary rejections.
Standard method used
The reference method is ISO 13934-1 tensile with cyclic extension. It defines sample size, conditioning and measurement, so results are only comparable when the same revision is used. Because the underband and strap anchors carry repeated load, target checks are made on a worn sample rather than flat fabric alone.
Reading the results
Aim for above 90% elastic recovery after 20000 cycles. Values near the limit usually indicate a borderline recipe rather than an acceptable one. Keep ISO 13934-1 tensile with cyclic extension named in the tech pack so every lot is measured the same way.
Typical limits in buying specifications
Brands set different limits depending on the end use of the technical sports bras, which is why the target must appear on the tech pack before sampling. Where technical sports bras is worn for everything from yoga to high impact training, set tolerances around that range of movement.
Common testing mistakes
Testing unwashed fabric, mixing shade results, and skipping conditioning are the errors that produce misleading numbers. Any change to power mesh and bonded spacer panels requires re-testing against above 90% elastic recovery after 20000 cycles before bulk is released.
Records to keep
Keep every report with the bulk file. Repeat orders are released faster when the previous result set is available immediately. Past reports from ISO 13934-1 tensile with cyclic extension help the mill reproduce the same recipe on the next order.
