Colour Bleeding Solutions for Yoga Sets: A Technical Guide
This guide sets out how colour bleeding can be engineered into coordinated yoga sets before bulk production begins.
How the problem appears in production
colour transfer into wash liquor or onto adjacent panels is most obvious long holds put sustained rather than shock load on the fabric. Buyers usually find it during fitting rather than in the lab, so early target setting matters. Because long holds put sustained rather than shock load on the fabric, target checks are made on a worn sample rather than flat fabric alone.
Specification targets that work
Set the measurable target at grade 4-5 colour change and staining. Without a number on the tech pack the mill chooses its own standard, which rarely matches the brand requirement. Keep ISO 105-C06 washing fastness named in the tech pack so every lot is measured the same way.
Fabric and finish options
The practical route combines increase soaping at 90 degrees, use a fixing agent appropriate to the dye class and control dyebath pH within plus or minus 0.3. Options can be combined, but every added step needs extra approval time. Where coordinated yoga sets is worn for studio practice and everyday wear, set tolerances around that range of movement.
Construction details
Pattern and seam placement decide whether the fix survives wear. Because the coordinated yoga sets is used for studio practice and everyday wear, allow for worst-case load rather than average use. Any change to soft brushed jersey with 4-way stretch requires re-testing against grade 4-5 colour change and staining before bulk is released.
Validation before bulk
Approve against ISO 105-C06 washing fastness and keep reports with the bulk file. A short pre-production run of 30-50 pieces exposes problems a lab sample cannot. Past reports from ISO 105-C06 washing fastness help the mill reproduce the same recipe on the next order.
