Colour Bleeding Solutions for Leggings: Care and Service Life Advice
Care instructions decide whether colour bleeding stays solved for the life of the high-waist leggings, not just until delivery.
What shortens performance
colour transfer into wash liquor or onto adjacent panels becomes obvious earlier when the garment is dried hot or washed with softener, because both attack the finish and the elastic. Because the knee and seat areas flex thousands of times a session, target checks are made on a worn sample rather than flat fabric alone.
Washing guidance
Wash at 30 degrees inside out with similar colours. Mild detergent preserves the finish applied for colour bleeding. Keep ISO 105-C06 washing fastness named in the tech pack so every lot is measured the same way.
Drying and storage
wash dark colours separately for the first cycles. Where high-waist leggings is worn for studio, running and strength sessions, set tolerances around that range of movement.
Expected service life
With correct care the target of grade 4-5 colour change and staining remains approachable for 40-50 home washes, after which routine replacement is reasonable. Any change to interlock or single jersey around 220-260 GSM requires re-testing against grade 4-5 colour change and staining before bulk is released.
Supporting the customer
Print clear care wording and mention ISO 105-C06 washing fastness validation on the product page so claims can be supported if questioned. Past reports from ISO 105-C06 washing fastness help the mill reproduce the same recipe on the next order.
