Odour Retention Solutions for Leggings: Test Methods Explained
Testing is how odour retention is verified for high-waist leggings. Knowing what the numbers mean prevents unnecessary rejections.
Standard method used
The reference method is ISO 20743 and AATCC 100. It defines sample size, conditioning and measurement, so results are only comparable when the same revision is used. Because the knee and seat areas flex thousands of times a session, target checks are made on a worn sample rather than flat fabric alone.
Reading the results
Aim for reduction of 99% against Staphylococcus aureus after 10 washes. Values near the limit usually indicate a borderline recipe rather than an acceptable one. Keep ISO 20743 and AATCC 100 named in the tech pack so every lot is measured the same way.
Typical limits in buying specifications
Brands set different limits depending on the end use of the high-waist leggings, which is why the target must appear on the tech pack before sampling. Where high-waist leggings is worn for studio, running and strength sessions, set tolerances around that range of movement.
Common testing mistakes
Testing unwashed fabric, mixing shade results, and skipping conditioning are the errors that produce misleading numbers. Any change to interlock or single jersey around 220-260 GSM requires re-testing against reduction of 99% against Staphylococcus aureus after 10 washes before bulk is released.
Records to keep
Keep every report with the bulk file. Repeat orders are released faster when the previous result set is available immediately. Past reports from ISO 20743 and AATCC 100 help the mill reproduce the same recipe on the next order.
