Bowing Specification Targets for Buyers
Setting Bowing correctly on a tech pack prevents most later disputes. Targets belong on the page before the first fabric sample.
Where to write it
Place Bowing next to composition and weight so all three are quoted as one package. Working figures for Bowing normally sit around below 2% deviation in mainstream production. Note mill inspection standard on the tech pack so nobody tests against an older revision.
Reference level
Typical activewear expectation: below 2% deviation. Record elastane content alongside Bowing, because blends shift the measured value. A result outside below 2% deviation usually points to process drift rather than to the fibre itself.
Tolerances that work
Allow a small tolerance rather than a fixed number, since normal process variation exists in every lot. Keeping reference values for Bowing lets suppliers quote without extra sampling rounds. Ask for conditioning details together with mill inspection standard, since both affect the reading.
Verification method
Confirm with mill inspection standard and keep the report against the bulk record. Working figures for Bowing normally sit around below 2% deviation in mainstream production. Note mill inspection standard on the tech pack so nobody tests against an older revision.
Commercial note
Tightening beyond practical need raises cost without improving garment life, so set the tightest target only where it protects the customer. Record elastane content alongside Bowing, because blends shift the measured value. A result outside below 2% deviation usually points to process drift rather than to the fibre itself.
