Seam Slippage What Improves It and What Damages It
Practical actions that raise or lower Seam Slippage during knitting, dyeing, finishing and garment care.
Actions that help
Correct construction choice and controlled setting improve performance, and they also keep the fabric near below 6 mm at 60 N. Working figures for Seam Slippage normally sit around below 6 mm at 60 N in mainstream production. Note ISO 13936-2 fixed load on the tech pack so nobody tests against an older revision.
Actions that damage it
Excess heat, over-aggressive softener and missing washing-off steps all reduce results. Record elastane content alongside Seam Slippage, because blends shift the measured value. A result outside below 6 mm at 60 N usually points to process drift rather than to the fibre itself.
Finishing influence
ISO 13936-2 fixed load results shift noticeably after finishing, so retest after the final process rather than before. Keeping reference values for Seam Slippage lets suppliers quote without extra sampling rounds. Ask for conditioning details together with ISO 13936-2 fixed load, since both affect the reading.
Garment care influence
Home washing temperature and drying method change performance over the first ten cycles. Working figures for Seam Slippage normally sit around below 6 mm at 60 N in mainstream production. Note ISO 13936-2 fixed load on the tech pack so nobody tests against an older revision.
Summary
Keep process settings documented so repeat orders land inside the agreed range every time. Record elastane content alongside Seam Slippage, because blends shift the measured value. A result outside below 6 mm at 60 N usually points to process drift rather than to the fibre itself.
