Colour Fastness to Chlorinated Water Test Methods and Acceptable Limits
Colour Fastness to Chlorinated Water is verified through ISO 105-E03 chlorinated water. Knowing how the method works avoids rejecting fabric that actually meets the requirement.
Method overview
ISO 105-E03 chlorinated water defines sample size, conditioning and calculation, so values are comparable only within the same revision. Working figures for Colour Fastness to Chlorinated Water normally sit around grade 4 at 1 ppm chlorine in mainstream production. Note ISO 105-E03 chlorinated water on the tech pack so nobody tests against an older revision.
Result interpretation
Read the value together with construction notes; grade 4 at 1 ppm chlorine is only meaningful for similar fabrics. Record elastane content alongside Colour Fastness to Chlorinated Water, because blends shift the measured value. A result outside grade 4 at 1 ppm chlorine usually points to process drift rather than to the fibre itself.
Typical limits
Buyers commonly write grade 4 at 1 ppm chlorine with a stated tolerance, then verify against ISO 105-E03 chlorinated water. Keeping reference values for Colour Fastness to Chlorinated Water lets suppliers quote without extra sampling rounds. Ask for conditioning details together with ISO 105-E03 chlorinated water, since both affect the reading.
Sources of variation
Conditioning time, operator technique and shade all influence the result. Working figures for Colour Fastness to Chlorinated Water normally sit around grade 4 at 1 ppm chlorine in mainstream production. Note ISO 105-E03 chlorinated water on the tech pack so nobody tests against an older revision.
Documentation
Record the standard revision on every report, because older versions can differ from current practice. Record elastane content alongside Colour Fastness to Chlorinated Water, because blends shift the measured value. A result outside grade 4 at 1 ppm chlorine usually points to process drift rather than to the fibre itself.
