Colour Fastness to Rubbing (Crocking) Specification Targets for Buyers
Setting Colour Fastness to Rubbing (Crocking) correctly on a tech pack prevents most later disputes. Targets belong on the page before the first fabric sample.
Where to write it
Place Colour Fastness to Rubbing (Crocking) next to composition and weight so all three are quoted as one package. Working figures for Colour Fastness to Rubbing (Crocking) normally sit around grade 4 dry, 3-4 wet in mainstream production. Note ISO 105-X12 rubbing on the tech pack so nobody tests against an older revision.
Reference level
Typical activewear expectation: grade 4 dry, 3-4 wet. Record elastane content alongside Colour Fastness to Rubbing (Crocking), because blends shift the measured value. A result outside grade 4 dry, 3-4 wet usually points to process drift rather than to the fibre itself.
Tolerances that work
Allow a small tolerance rather than a fixed number, since normal process variation exists in every lot. Keeping reference values for Colour Fastness to Rubbing (Crocking) lets suppliers quote without extra sampling rounds. Ask for conditioning details together with ISO 105-X12 rubbing, since both affect the reading.
Verification method
Confirm with ISO 105-X12 rubbing and keep the report against the bulk record. Working figures for Colour Fastness to Rubbing (Crocking) normally sit around grade 4 dry, 3-4 wet in mainstream production. Note ISO 105-X12 rubbing on the tech pack so nobody tests against an older revision.
Commercial note
Tightening beyond practical need raises cost without improving garment life, so set the tightest target only where it protects the customer. Record elastane content alongside Colour Fastness to Rubbing (Crocking), because blends shift the measured value. A result outside grade 4 dry, 3-4 wet usually points to process drift rather than to the fibre itself.
